Building a Beautiful Boat Frame | Building Temptress Ep5
2 min read
– Ways you can support –
Patreon – https://www.patreon.com/danleeboatbuilding
Buy me a beer – https://buymeacoffee.com/danleeboatbuilding
Buy Temptress plans – https://danleeboatbuilding.co.uk/product/temptress-24ft-runabout/
Buy Temptress merch – https://danleeboatbuilding.myspreadshop.co.uk
More about the project – https://danleeboatbuilding.co.uk/building-temptress/
– In this video –
In this video I am building frame 2. This is the first of the frames that will be visible within the finished boat and so I am going to a few extra measures to make this one extra beautiful!
I am veneering the bulkhead so I show you how I re saw veneers and then glue them to the plywood using a vacuum bagging technique. I then build a lamination that runs around the aperture in the bulkheads opening to soften and protect its edges.
We finish up with a CNC frame carving process to cut the bevels and notches into the frame and it turns out to be the best one that I have done yet!
– Project sponsors –
I want to say a huge thank you to the following sponsors that are helping to reduce the materials cost for me on this build in order to help me get things moving! Current project sponsors are:
https://www.epifanes.com/introduction
#buildingTemptress
Chapters:
0:00 Intro
1:12 Sawing veneers
9:45 Glueing veneers
15:20 Vacuum bagging
24:38 Cleaning up the bulkhead
27:53 Laminating the aperture
39:38 A look at the frame
For more regular updates, find me below
– Website –
– Patreon –
https://www.patreon.com/danleeboatbuilding
– Buy Me a Beer –
https://buymeacoffee.com/danleeboatbuilding
– Facebook –
https://www.facebook.com/danleeboatbuilding/
– Instagram –
https://www.instagram.com/danleeboatbuilding/
